Arkimix PV7

Premium, high-performance, polymer-modified cementitious tile adhesive.

Arkimix PV7 is a versatile, ready-to-use, PVA polymer-based liquid bonding agent and cement modifier. It is used as an integral bonding agent for cementitious mixes such as tile adhesives, plaster (rendering), repair mortars, and floor screeds.

Uses

✓ Used as an integral bonding agent.
✓ Suitable for cementitious tile adhesive mixes.
✓ Suitable for plastering (rendering) applications.
✓ Suitable for repair mortars.
✓ Used as a cement modifier to improve performance.

Advantages

✓ Completely VOC-free (Zero VOC) and eco-friendly product.
✓ Improves the mechanical properties of the cementitious mix.
✓ Good resistance to abrasion and wear.
✓ Enhanced bond strength to surfaces.
✓ Reduces bleeding (water segregation) in concrete.

Usage Instructions

Follow each step for best results.

01 Surface Preparation

Use fresh cement and well-graded aggregates that are free from excess fines. Ensure that the concrete surface and mixing materials are suitable for the intended application. Avoid using excessive water, as modified mixes may appear more workable than they actually are.

02 Mixing

It is preferred to use a pan mixer. Manual mixing is allowed when the total weight of the mix is less than 25 kg. Add the required quantity of sand and cement, then pour the required quantity of Arkimix PV7 and mix for 2 minutes only to avoid excessive air entrainment. Carefully add water until the desired consistency is achieved.

03 Application

Use Arkimix PV7 as an integral bonding agent and cement modifier for cementitious mixes such as tile adhesives, plaster (rendering), repair mortars, and floor screeds. Apply the modified mix according to the work requirements. The spreading and troweling process must be carried out concurrently with the workflow; avoid over-spreading or over-troweling.

04 Cleaning

Clean all tools with water before the material dries and hardens. Hardened material can only be removed mechanically.

≡ Technical Data
Form	Specially formulated copolymer emulsion
Colour	White
Density	1.01 kg/L
Dosage	8–10 L per 50 kg of cement
Mixing Method	A pan mixer is preferred
Hand Mixing	Permitted when the total mix weight is less than 25 kg
Mixing Time	2 minutes only
Curing	Moist cure for at least 1 day
Shelf Life	Minimum 12 months
Storage Temperature	5°C to 35°C
Packaging	3.75 L and 20 L gallon containers
Volatile Organic Compounds (VOC)	Zero VOC
Flammability	Non-flammable
Hazard Classification	Not classified as hazardous

DOWNLOADS

Arkimix PV7

Explore More Products

Arkimix ACR

Versatile polymer latex for cementitious mixes used in plastering (rendering), floor screeds, and external rendering.

Arkimix PV1

Premium, high-performance, polymer-modified cementitious tile adhesive.

Arki-Bond UW

Underwater-grade cementitious adhesive for pools and wet areas.